PNG3XX INSTALLATION MANUAL
NAM-PNG3xx-TM-EN-C.doc
The information contained in this document is the property of Automatic
Systems and is confidential. The recipient shall refrain from using it for any
urpose other than the use of the products or the execution of the project to
which it refers and from communicating it to third parties without written prior
agreement of Automatic Systems. Document subject to change without notice.
9
1.4 U.L. (Underwriters Laboratories) Notes
The entire device is UL-325 listed. The UL file number is E210350.
The UL listing is your assurance of safety in the ongoing operation of this device.
Specific protection is incorporated - such as finger shutters, limited torque of the obstacle’s movement,
and isolated electrical currents.
To maintain compliance with UL listing requirements, the following actions must be performed in conjunction with
the installation:
1) The installation and wiring methods as well as all materials used must be UL listed for the specific
purpose used. Please take extra care preparing for and during the installation to comply with all UL
and NEC requirements.
2) The BASEPLATES are an integral part of the PNG and ARE REQUIRED
by Underwriters Laboratories.
They are designed to contain burning material in the unlikely event of a fire, regardless of the flooring
material. They also aid in the RF shielding of the units.
3) All holes punched in the baseplate must be properly sealed to prevent fire propagation.
FAILURE TO PERFORM TO ALL ACTIONS ABOVE WILL VOID THE UL LISTING OF THE PNG.
To Next Page
