11
Quad-Damped Isolation Base Mount
Base support, please set the Pro iCAN on a at surface.
Tip: The Quad-damped Isolation Base Mount was specially-designed to provide the ultimate vibration damping control and
electromagnetic shielding. It consists of a custom quad-layer sandwich; dual layer elastomers (silicone layer and copolymer of
ethylene and vinyl acetate layer), and a dual-layer of metal alloy (aluminium alloy layer and ferrous alloy layer nished with special
honeycomb coating).
Together with the variable (golden ratio) thickness chassis, the chassis resonance is optimally distributed and minimised.
DC Loop-Out
DC loop through for use with Pro iCAN add-ons (e.g. Electrostatic module).
Connector for iFi Electrostatic Add-on Module
This is only for connection with the iFi Electrostatic module. DO NOT CONNECT ANY OTHER EQUIPMENT!
DC Power Supply Input
15V/4A DC Power input.
Tip: Any 9v to 18v DC power source with a minimum 60VA rating can be used with the Pro iCAN (including vehicular, RV and boat
based 12V DC power). The Pro iCAN uses double-conversion power supplies that make it impervious to power supply noise and
related problems. However, we strongly recommend the use of the included iPOWER Plus 15V. It oers the latest in power supply
technology and is better and cleaner than battery and aftermarket linear power supplies.
16.
17.
18.
19.
To Next Page
Loading...
