EasyManua.ls Logo

iFIT WEIDER 2980 X - Part Identification Chart

iFIT WEIDER 2980 X
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
M6 Washer (80)
M8 Washer (59)
M10 Washer (57)
Large Washer (78)
M8 Locknut (58)
M10 Locknut (56)
M10 x 25mm Screw (77)
M8 x 20mm Shoulder Bolt (65)
M6 x 16mm Screw (62)
M4 x 25mm Self-tapping Screw (72)
M12 Nut (82)
M4 x 19mm Self-tapping Screw (69)
M6 Locknut (84)
M10 x 45mm Bolt (81)
M10 x 63mm Bolt (75)
M10 x 68mm Bolt (71)
M10 x 80mm Bolt (67)
M10 x 155mm Bolt (74)
M8 x 65mm Bolt (68)
M8 x 50mm Shoulder Bolt (83)
M6 x 65mm Screw (70)
M10 x 77mm Bolt (79)
M10 x 50mm Bolt (66)
M8 x 58mm Carriage Bolt (64)
M10 x 64mm Bolt Set (85)
PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. Note: If a part is not in
the hardware kit, check to see if it has been preassembled. Extra parts may be included.

Related product manuals