IFM Electronic TR7432 - Accessing Advanced Menu; Securing Unit Settings

11
UK
Change from menu level 1 to menu level 2:•
Press [Mode/Enter] until [EF] is ►
displayed.
If the submenu is protected with an ac-
cess code, [Cod1] flashes in the display.
Press [Set] and keep it pressed until ►
the valid code no. is displayed.
Press [Mode/Enter] briefly. ►
On delivery by ifm electronic: no access
restriction.
 
Press [Set] briefly. ►
The first parameter of the sub-menu >
is displayed (here: [HI]).
 
With the user interface of the ifm Container program:
Activate the [EF] button. ►
If menu level 2 is protected by an access code, the input field for the code no. is
activated.
Enter valid code no. ►
Locking / unlocking•
The unit can be locked electronically to prevent unintentional settings.
Make sure that the unit is in the ►
normal operating mode.
Press [Mode/Enter] + [Set] for 10 s. ►
[Loc] is displayed. >
 

During operation: [Loc] is briefly displayed if you try to change parameter values.
For unlocking:
Press [Mode/Enter] + [Set] for 10 s. ►
[uLoc] is displayed. >
 

On delivery: unlocked.
Timeout:•
If no button is pressed for 15 s during parameter setting, the unit returns to the operat-
ing mode with unchanged values.