IO-Link Master with IoT Interface DataLine 4 Ports IP 65 / IP 66 / IP 67
>
9.2.9 Control IO-Link master
52251
Different services and management functions can be carried out on the IO-Link master.
Substructure: firmware
Available data points:
Area for updating the firmware
Maximum size of the container area (in bytes)
Size of a data segment (in bytes)
Size of the container area (in bytes)
r = only read
w = write only
Applicable services:
Reset IO-Link master to factory settings
Trigger the flashing of the status LED
Install firmware transferred to the IO-Link master
Transfer an individual data segment
../container/start_stream_set
Start sequential transmission of several data segments