IFM CR3133 - CAN - Mobile Device; PC Interface P2 P WLAN Mini Access Point

CANwireless CR3133
19
Object Index Subindex Data type Configuration
Server Type 0x3010 0x18 Unsigned 16 30000 (default)
Tab.6: WLAN server (Mini Access Point)
Object Index Subindex Data type Configuration
WLAN Enable 0x3008 0x02 Unsigned 8 1: switch on
Bluetooth Enable 0x3008 0x03 Unsigned 8 0: switch off
WLAN Operating Mode 0x3000 0x01 Unsigned 8 1: infrastructure
SSID 0x3000 0x02 Visible_string Enter the SSID of the WLAN network
Authentication Type 0x3000 0x04 Unsigned 8 7: WPA/WPA2 Mixed
Authentication Key 0x3000 0x05 Visible_String Enter the authentication key of the
WLAN network
DHCP 0x3000 0x09 Unsigned 8 1: client
(only for WLAN infrastructure)
Hostname 0x3005 0x01 Visible_string Enter a unique device name
Connection Command
1
0x3010 0x01 Unsigned 8 2: connect with static address
Client Enable 0x3010 0x15 Unsigned 8 3: turn on client
Server Type 0x3010 0x16 Unsigned 8 1: socket (TCP/UDP)
Server Type 0x3010 0x18 Unsigned 16 30000 (default)
EEP URL Address/
WLAN Client only 1
0x3010 0x17 Visible_string Enter the IP address of the WLAN
MiniAP
Tab.7: WLAN client (infrastructure)
8.3.10 CAN - Mobile device/ PC interface P2P WLAN Mini Access Point
In this mode, a wireless connection is established between a CANwireless device and any other
WLAN-enabled device via WLAN. The CANwireless device needs to be configured as follows:
Object Index Subindex Data type Configuration
WLAN Enable 0x3008 0x02 Unsigned 8 1: switch on
Bluetooth Enable 0x3008 0x03 Unsigned 8 0: switch off
WLAN Operating Mode 0x3000 0x01 Unsigned 8 2: Mini Access Point (default)
SSID 0x3000 0x02 Visible_string Enter a unique name for the WLAN
network
Authentication Type 0x3000 0x04 Unsigned 8 7: WPA/WPA2 Mixed
Authentication Key 0x3000 0x05 Visible_String Enter a secure authentication key with
at least 8 characters
DHCP 0x3000 0x09 Unsigned 8 2: server (default)
(only for WLAN MiniAP)
Hostname 0x3005 0x01 Visible_string Enter a unique device name
IP address 0x3000 0x0a Visible_string 192.168.0.34
Network mask 0x3000 0x0b Visible_string 255.255.255.0
Gateway address 0x3000 0x0c Visible_string 192.168.0.1
Primary DNS Server 0x3000 0x0d Visible_string 192.168.0.1
Secondary DNS Server 0x3000 0x0e Visible_string 192.168.0.2
Connection Command
1
0x3010 0x01 Unsigned 8 0: default
Server Enable 0x3010 0x15 Unsigned 8 2: turn on server
Server Type 0x3010 0x16 Unsigned 8 1: socket (TCP/UDP)