IFM CR3133 - Light Indicators; On Led; Status Led

CANwireless CR3133
9
7 Light indicators
2
1
1: ON LED
2: STATUS LED
7.1 ON LED
Colour State Meaning
- Off The device is switched off or in sleep mode.
Green Flashing slowly The device is in update mode and ready to receive a
firmware update.
The ON and STATUS LEDs flash simultaneously.
Green Flashing quickly Firmware is being installed.
The ON and STATUS LEDs flash simultaneously.
Green On The device is switched on.
Terminal 30 voltage is in the permissible range.
Red On The device is switched on.
Terminal 30 voltage is outside the permissible range.
Orange On The device is reset to factory settings.
The ON and STATUS LEDs are lit simultaneously.
Turquoise On The radio module is being updated (via HTTP server).
The ON and STATUS LEDs are lit simultaneously.
Magenta On Active connection with CANwireless configurator
The ON and STATUS LEDs are lit simultaneously.
Tab.1: ON LED
7.2 STATUS LED
The STATUS LED indicates the operating status of the active connection.
Colour State Meaning
- Off The device is switched off or in sleep mode.
Green Flashes (200 ms on, 200 ms off, 200
ms on, 1000 ms off)
The device is initializing.
Green Flashes (200 ms on, 200 ms off) The device is ready for connection.
Green On The device has established a connection.
The device functions reliably.