IFR COM-120B Service Manual

STEP PROCEDURE
39.
Access
each
Data Field for f requencies
0.2500
to 999.9999
MHz.
For
each
Data
Field,
perform
following:
O
Press
ENTER Key
to access
Data
Field.
O Edit Data Field
using
DATA
SCROLL
Keys
(17)
tor Measuring
Receiver
reading
closest to
-20
dBm.
a
Press
ENTER Key
and
wait
until
current
Field
displays CALIBnATED.
O
Continue
with next Field.
40. Press
AUX
Soft
Function
Key F4.
41.
Connect Measuring Receiver
to
AUX
RF
OUT Connector
(13).
42. Access
each
Data Field for f requencies
0.2500
to 999.9999 MHz. For
each Data Field,
perform
following:
a
Press
ENTER Key
to access Data Field.
a Edit Data Field
using DATA
SCROLL Keys
(17)
tor
Measuring
Receiver
reading
closest to
-13
dBm.
O
Press ENTER
Key
and
wait
until
current
Field
displays CALIBRATED.
O Continue
with
next Field.
43. lf
Optional Amplifier is installed,
press
AUX
AMP
Soft
Function
Key
F5.
44. Access
each
Data Field for f requencies
0.2500 to 999.9999 MHz.
For
each Data Fietd,
perform
following:
a Press ENTER
Key
to access
Data
Field.
O Edit
Data Field
using
DATA
SCROLL Keys
(17)
for
Measuring
Receiver reading
closest
to 0.0 dBm.
O
Press
ENTER
Key
and
wait
until
current
Field
displays CALIBRATED.
O Continue with next Field.
45. Press
RETURN
Soft
Function Kev F6.
46.
Press
GEN
Test
Mode Key
(3).
47.
Continue at Step 2.
1-'13
STEP PROCEDURE
39. Access each Data Field for frequencies 0.2500 to 999.9999 MHz. For each Data Field.
perform following:
• Press ENTER Key to access Data Field.
• Edit Data Field using DATA SCROLL Keys (17) for Measuring Receiver reading
closest to -20 dBm.
• Press ENTER Key and wait until current Field displays CALIBRATED.
• Continue with next Field.
40. Press AUX Soft Function Key F4.
41. Connect Measuring Receiver to AUX RF OUT Connector (13).
42. Access each Data Field for frequencies 0.2500 to 999.9999 MHz. For each Data Field.
perform following:
• Press ENTER Key to access Data Field.
• Edit Data Field using DATA SCROLL Keys (17) for Measuring Receiver reading
closest to -13 dBm.
• Press ENTER Key and wait until current Field displays CALIBRATED.
• Continue with next Field.
43. If Optional Amplifier is installed. press AUX AMP Soft Function Key F5.
44. Access each Data Field for frequencies 0.2500 to 999.9999 MHz. For each Data Field.
perform following:
• Press ENTER Key to access Data Field.
• Edit Data Field using DATA SCROLL Keys (17) for Measuring Receiver reading
closest to 0.0 dBm.
• Press ENTER Key and wait until current Field displays CALIBRATED.
• Conti nue with next Field.
45. Press RETURN Soft Function Key F6.
46. Press GEN Test Mode Key (3).
47. Continue at Step 2.
1 -13
Scans by ArtekMedia © 2008

IFR COM-120B Specifications

General

Brand	IFR
Model	COM-120B
Category	Measuring Instruments
Language	English