IFR COM-120B Service Manual

STEP
PROCED U
RE
28.
Move
cursor
to
10 kHz Field.
29.
Enter
Modulation
Analyzer Reading
in Data
Field
using
DATA
ENTRY
Keys
(5).
30.
Press
ENTER Key
and
wait
until
Field displays
CALIBRATED.
31. Set
Signal
Generator
tor 20 kHz deviation.
32.
Move
cursor
to
20 kHz Field.
33.
Enter
Modulation
Analyzer Reading
in
Data Field
using
DATA ENTRY
Keys
(5).
34.
Press
ENTER Key and
wait
until
Field displays CALtBnATED.
35. Set Signal
Generator
for
50
kHz
deviation.
36.
Move cursor
to
50
kHz Field.
37.
Enter
Modulation Analyzer
Reading
in Data
Field
using
DATA ENTRY
Keys
(5).
38.
Press
ENTER Key
and
wait
until
Field
displays
CALIBRATED.
39. Set Signal
Generator
f
or
100 kHz
deviation.
40. Move
cursor
to
100 kHz Field.
41.
Enter Modulation
Analyzer Reading
in
Data Field
using
DATA ENTRY
Keys
(5).
42.
Press ENTER Key and
wait
until
Field
displays
CAL,BnATED.
43. Press
RETURN
Soft
Function Key F6. Go
to Step
2.
1-40
STEP
PROCEDURE
28. Move cursor to 10kHz Field.
29. Enter Modulation Analyzer Reading in Data Field using DATA ENTRY Keys (5).
30. Press ENTER Key and wait until Field displays CALIBRATED.
31. Set Signal Generator for 20 kHz deviation.
32. Move cursor to 20 kHz Field.
33. Enter Modulation Analyzer Reading in Data Field using DATA ENTRY Keys (5).
34. Press ENTER Key and wait until Field displays CALIBRATED.
35. Set Signal Generator for 50 kHz deviation.
36. Move cursor to 50 kHz Field.
37. Enter Modulation Analyzer Reading in Data Field using DATA ENTRY Keys (5).
38. Press ENTER Key and wait until Field displays CALIBRATED.
39. Set Signal Generator for 100 kHz deviation.
40. Move cursor to 100 kHz Field.
41. Enter Modulation Analyzer Reading in Data Field using DATA ENTRY Keys (5).
42. Press ENTER Key and wait until Field displays CALIBRATED.
43. Press RETURN Soft Function Key F6. Go to Step 2.
1-40
Scans by ArtekMedia © 2008

IFR COM-120B Specifications

General

Brand	IFR
Model	COM-120B
Category	Measuring Instruments
Language	English