en
10
User manual Costa www.igloo.pl
Fig.1 Construction of the device 11
Fig.2 Removing the wooden platform 12
Fig.3 Mounting the hook in the frame 12
Fig.4 Grid shelf system 12
Fig.5 Metal shelf system (option) 13
Fig.6 Meat hook strip (option) 13
Fig.7 Fruit and vegetable baskets (option) 13
Fig.8 Control panel 13
Fig.9 Changing the fl uorescent lamp 15
Fig.10 Data plate 16
Fig.11 „Igloo” thermostat control panel 17
Fig.12 „Carel” thermostat control panel 18
1. UNLOADING
The device should be transported in vertical position, and it should be properly secured and packed. The manufacturer
ships the device on a special wooden platform, secured with cardboard angle sections and foil.
2. PROPERTIES OF THE DEVICE
2.1. Purpose
“COSTA” is a universal cooling device used to store and display a wide assortment of grocery products previously cooled
to storing temperature. Guaranteed temperature within the refrigerating rack ranges between +2ºC and +8ºC with ambient
temperature ranging between +15ºC and +25ºC and relative air humidity of up to 60%.
2.2. Description of the device
“COSTA” racks are equipped with dynamic cooling. All types of devices are equipped with electronic thermostat and
automatic defrosting. They can be connected in sequences in the version on the central aggregate (mod/C). Racks are
equipped with 5 grid display shelves, with regulated height and fi xing angle. It is also possible to order full shelves made
of metal plate, meat hooks or fruit and vegetable baskets.
Interior of the rack may be illuminated with fl uorescent lamps placed vertically in side parts of the refrigerating rack. The
rack is equipped with glazed, sliding doors. Our devices are made according to modern technologies and have all certi-
fi cates required by law.
This sign signifi es information of particular meaning for user security and for proper device
exploitation.
Contents List of Figures
List of tables
Table 1 Technical data 11
User manual
1. UNLOADING 10
2. PROPERTIES OF THE DEVICE 10
2.1. Purpose 10
2.2. Description of the device 10
2.3. Technical data 11
3. PREPARING THE DEVICE FOR EXPLOITATION 12
3.1. Requirements concerning the place of installation 12
3.2. Connection and actuation 12
4. EXPLOITATION 13
4.1. Temperature regulation 14
5. MAINTENANCE 14
5.1. Cleaning and maintenance 14
6. SERVICE 15
6.1. Fault identifi cation and repair 15
6.2. Service 16
7. THERMOSTAT SERVICE 17
7.1. “IGLOO” thermostat 17
7.2. “CAREL” thermostat 18
en
COSTA
To Next Page
Loading...
