2 – 10
ᵐ
OPERATION
21
Seat Belt (if equipped)
* ALWAYS fasten the seat belt while
operating the machine.
* ALWAYS check the condition of the seat
belt and mounting hardware before
operating the machine. Replace if
damaged.
To Check the Belt
Check for worn or damaged buckle, extrusion
and mounting hardware. Replace them if they
worn or damaged.
To Fasten the Belt
With gripper c held and insert extrusion
d
into
buckle e until correctly latched.
Adjust the seat belt length according to your
body size. Slightly pull the belt f and confirm the
belt is fastened.
To Unfasten the Belt
Push in button g of buckle e and extrusion
d
will be released from buckle e.
CAUTION
Typical Example
To Next Page
Loading...
