IHI 55N3 - Recommended Lubricant Table

3 – 3
ᵑ
MAINTENANCE
3-2 RECOMMENDED LUBRICANT TABLE
API, Class CD
SAE5W-20
Cold Regions
API, Class CD
SAE10W-30
250 Hrs.
Initial oil
change
50 hours
Max.
11.2 liter
Min.
6.7 liter
GeneralDiesel Engine
1000 Hrs.
(500 Hrs.
when
breaker
used)
Total
Amount
110 liter
Tank Capacity
75 liter
Hydraulic
Oil
Lower Roller
Front Idler
Upper Roller
Travel
Reduction Gear
0.08 liter
(Each)
0.08 liter
(Each)
0.06 liter
(Each)
1.1 or 1.3 liter
(Each)
Upon
occasion
Upon
occasion
Upon
occasion
1000 Hrs.
Grease in
Swing Gear
11.5 liter 1000 Hrs.
Lubricate the
Fitting
Swing Bearing,
Attachment pins, etc.
API, Class CD
SAE15W-40
API,
GL-4,
ISO-VG 320
SAE 90
Gear Oil
EP2 Lithium
Grease
Tropical
Regions
Wear Proof
Hydraulic Fuluid
ISO-VG 46
Ambient
Temperature
- 5 °C
Wear Proof
Hydraulic Fuluid
ISO-VG 32
Ambient
Temperature
Below
- 5 °C
LOCATIONS USE
REFILL
CAPACITIES
(APPROXIMATE)
CHANGE
INTERVALS
LUBRICANT
VISCOSITIES
Note:
1. Oils in the hydraulic fluid columns marked with *should be use above 0 ºC.
2. If the oil becomes dirty or deterioration of the oil’s properties are excessive, replace more
frequently than described above.
3. Disassemble the lower roller and upper roller when replacing the oil in them.