Need help?Do you have a question about the IHI 17VX3 and is the answer not in the manual?
Details base machine performance, engine, weight, and fuel/oil/coolant quantities.
Provides details on bucket capacity, dimensions, and combinations for different applications.
Lists key dimensions of the machine with code references for identification.
Illustrates the boom swing digging working range with specific radii.
Details the working range for backhoe operations with standard and long arms.
Details the weight of the machine by component and configuration.
Shows the standard color codes for machine painting.
Provides detailed specifications for the engine and its systems.
Presents load rating charts for various lifting configurations.
Details safety signs, their locations, and explanations.
Identifies major machine components with numbered diagrams.
Illustrates the main hydraulic system with components and flow paths.
Provides a detailed schematic of the hydraulic circuit.
Lists interchangeable parts and compatibility with other models.
Shows the layout and names of engine components.
Details the hydraulic tank assembly and maintenance intervals.
Explains the pump drive device assembly and installation notes.
Illustrates the hydraulic pump assembly and provides port information.
Presents performance data charts for the hydraulic pump.
Describes the control valve assembly, its parts, and pressure settings.
Details the swing drive and bearing assembly, including installation notes.
Illustrates the boom cylinder assembly, its parts, and hydraulic symbols.
Explains the rotary joint and lower piping assembly with diagrams.
Details the travel motor and reduction gear assembly.
Describes the crawler shoe adjusting device and its maintenance.
Illustrates the front idler assembly and its maintenance requirements.
Details the lower roller assembly and its maintenance.
Shows the shape and cross-section of the rubber crawler shoe.
Explains the remote control valve assembly and its operation.
Details the boom cylinder assembly, parts, and tightening torques.
Illustrates the arm cylinder assembly, its parts, and tightening torques.
Provides details on the bucket cylinder assembly, parts, and torques.
Describes the swing cylinder assembly, its parts, and specifications.
Details the blade cylinder assembly, parts, and tightening torques.
Illustrates the spanner cylinder assembly and its components.
Lists parts and notes for the attachment assembly.
Shows dimensions and details for the bucket assembly.
Provides installation data for hydraulic breakers and hydraulic system details.
Details the monitor panel, reverse side, and electrical circuit.
Shows names and arrangements of electrical wiring devices.
Presents the schematic diagram of the electrical wiring system.
Identifies and describes the main controls and instruments of the machine.
Explains the function of warning lamps like oil pressure and charge.
Details the fuel level gauge, water temperature gauge, and service hour meter.
Describes the light switch, engine start switch, and horn switch.
Explains the operation of control shut-off lever and left operating lever.
Details the right operating lever for bucket and boom controls.
Describes the travel lever and high speed travel pedal.
Explains blade lever, boom swing pedal, and operator's seat adjustments.
Provides instructions on how to use and inspect the seat belt.
Outlines daily checks including walk-around, lubrication, and pre-start checks.
Details procedures for starting the engine in normal and cold weather.
Explains the procedure for starting the engine using jumper cables.
Describes warm-up procedures and break-in operation for new machines.
Illustrates lever operations for boom, bucket, arm, and swing.
Explains operation of hydraulic breakers and other special attachments.
Provides instructions for straight travel, including forward, stop, and reverse.
Details steering methods like pivot turns and spot turns.
Covers high speed travel operation and cautions on slopes.
Explains the procedure for extending and retracting the crawler mechanism.
Provides recommendations and warnings for towing a disabled machine.
Details procedures and precautions for lifting the machine.
Explains procedures for loading onto a truck and securing the machine.
Highlights precautions for using rubber track shoes to prevent damage.
Describes the method for lowering the boom when the engine is stopped.
Covers machine stopping, freezing conditions, engine stopping, and leaving the machine.
Lists maintenance tasks and their recommended intervals based on service hours.
Provides a chart for lubrication, maintenance, and checks at various intervals.
Details recommended lubricants, capacities, and use conditions.
Explains how to measure and adjust track tension.
Provides guidelines for repairing or replacing rubber track shoes.
Explains the location, function, and replacement of fuses.
Details procedures for cleaning, recharging, and inspecting the battery.
Describes how to remove and install the bucket, including clearance adjustment.
Explains procedures for replacing bucket teeth and side cutters.
Details how to check and maintain the engine oil level.
Explains how to check and maintain the hydraulic oil level.
Describes the maintenance and draining procedure for the water sedimenter.
Outlines daily walk-around inspection points for the machine.
Details draining water and sediment from the fuel tank.
Provides step-by-step instructions for changing engine oil and filter.
Explains how to service and replace air cleaner filter elements.
Describes the procedure for replacing the secondary air cleaner element.
Details how to clean the fuel filter element and prime the system.
Covers inspection and adjustment of the fan and alternator belt.
Specifies torque values for critical bolts and general torque specifications.
Explains how to change the hydraulic return filter.
Details how to change the fuel filter element and check travel drives oil.
Provides instructions for changing the travel drive oil.
Details the procedure for changing hydraulic oil and cleaning the strainer.
Describes the procedure for changing the engine coolant.
Discusses precautions for extreme cold, heat, and dusty work sites.
Provides guidance on preparing the machine for long-term storage.
Lists pressure settings for relief valves and gauge port locations.
Details measurement and adjustment procedures for main relief valves.
Explains measurement and adjustment procedures for overload relief valves.
Covers measuring and adjusting the swing relief valve pressure.
Explains how to conduct performance judgments and required instruments.
Lists standard and allowable values for engine, hydraulic pressure, and lever force.
Details standards for swing operation, floating angle, and natural drift.
Covers travel speed, alignment, natural drift, and crawler belt time.
Specifies standard and allowable speeds for boom, arm, and bucket cylinders.
Details cylinder speeds for blade and boom swing, and cylinder drift.
General| Brand | IHI |
|---|---|
| Model | 17VX3 |
| Category | Compact Excavator |
| Language | English |
To Next Page
