SPECIFICATIONS
WARNING SIGNS AND LABELS
17VX3
There are several specific safety signs
on
your machine. Their exact location and description of the
hazard are reviewed
in
this section.
Please take the time to familiarize yourself with these safety signs.
Wake sure that you can read all safety signs. Clean or replace these if you cannot read the words or see
the pictures. When cleaning the labels use a cloth, water and soap.
Do
not use solvent, gasolin, etc.
You must replace a label if it
is
damaged, missing or cannot
be
read. If a label
is
on
a part that
is
replaced, make sure a new label
is
installed
on
the replaced part.
See you IHI dealer new labels.
Located warning levels
1 - 8 - 1
To Next Page
Loading...
