MAINTENANCE
RECOMMENDED LUBRICATION TABLE
17VX3
REFILL
CAPACITIEAS
CHANGE LUBRICANT
LOCATION
USE
(APPROXIMATE)
INTERVALS VISCOSITIES
Cold Regions
API, Class CD
Max. 250 Hrs.
SAE20
3.8 liter
Diesel Engine
Initial oil
General
API, Class CD
SAE30
Min. change
2.1
liter 50 hours
Tropical API, Class CD
Regions SAE40
Total 1000 Hrs. Ambient Wear Proof
Amount Temperature Hydraulic Fluid
23 liter (500 Hrs.
-5°C
ISO - VG46
Hydraulic Oil
when
Ambient Wear Proof
Tank Capacity breaker
Temperature Hydraulic Fluid
19
liter used)
Below -5°C ISO - VG32
0.025 liter Upon
API, GL-4
Track Rollers
-
(Each) occasion ISO-VG320
0.07 liter Upon
(SAE90)
Front Idlers
-
(Each) occasion
Gear Oil
0.33 liter API, Class CD
Travel Drives 1000 Hrs.
-
(Each) SAE30
Lubricate Swing Bearing, EP2 Lithium
-
the Fitting Attachment pins, etc. Grease
Note:
1.
Oils
in
the hydraulic fluid columns marked with *should
be
use above
DoC.
2.
If the oil becomes dirty or deterioration of the oil's properties are excessive, replace more frequently
than described above.
3.
Disassemble the track roller and upper roller when replacing the oil
in
them.
4-3-1
To Next Page
Loading...
