IHI 17VX3 - LONG TERM STORAGE

MAINTENANCE
LONG TERM STORAGE
• Before Storage
To protect the cylinder rods, set the machine position in the
right illustration.
(To prevent the cylinder rods from being
rusted)
To store the machine from long term, follow the next
procedures.
• Clean parts of the machine and store indoors.
If you have to place the machine outdoors, choose a flat
place and cover the machine.
• Be sure to perform fill the fuel, lubrication, and oil change.
• Apply grease
on the exposed part of the hydraulic cylinder
piston rods.
• Store the battery after move the negative terminal and
covering it or dismounting the battery from the machine.
• Lock the control levers and pedals with the lock lever and
pedal lock.
• During Storage
,,-------- ---------
If you have to operate the machine indoors to prevent rust,
keep good ventilation and gas poisoning by window or
entrance.
During storage, operate the machine once a month to
maintain films
of oil at the lubrication section and charge the
battery at the same time.
• After Storage
After long term storage, follow the next procedures before
operating the machine.
• Wipe away grease
on the hydraulic cylinder rods.
• Be sure to perform fill the fuel and lubrication.
4-12-1
17VX3
LONG TERM