OPERATION
@ Travel Lever
* Normal traveling
is
when the drive sprocket are under
the rear
of
the machine. Blade are under the front
of
the
cab. Reverse traveling
is
when the cab
is
over the
sprockets. Both the directional and traveling functions
will be reversed.
* Always travel with sprockets under the rear of the
machine.
Forward Direction
Travel:
Move the both travel levers forward to move the machine
forward direction.
Stop:
Release the travel levers to stop the machine and apply the
brakes.
Reverse Direction
Travel:
Move the both travel levers rear to move the machine
reverse direction.
Refer to Traveling the Machine section
of
this manual.
® High Speed Travel Pedal
* NEVER high speed travel
on
a grade or loading and
unloading the machine.
* When control shut-off lever
is
locked, does not change
to high speed travel.
Low
Speed Travel
Release the pedal to low speed travel. Select the
LOW
speed travel when driving
on
rough or soft surface. Low
is
also recommended for loading or unloading from a truck.
High Speed Travel
During push down the pedal to shift the high speed travel.
Select the
HIGH speed travel when driving on a hard even
surface.
3 - 1 - 7
17VX3
To Next Page
Loading...
