iHome AUTOVAC ECLIPSE iHRV10 User Manual

Beforestartingyourrstcleaningcyclepleasecleartheoorofallobjectsotherthanfurnitureassomesmallobjectsmayobstruct,getcaughtin,ordamage
the iHome Autovac Eclipse.
FIRST CLEANING
Simply press the Power button on your Eclipse to begin an Auto-Clean cycle of your home. Eclipse will start cleaning and will continue until it has covered the
entire cleaning area.
CLEANING MODES
Auto Clean - TheEclipsewillautomaticallycleanyourooruntilithascoveredtheentiresurface.OncecleaningisnishedtheEclipsewillautomaticallyreturn
backtocharge.
Powermop Scrub - FillthewatertankandconnectthePowermopScrubattachment.Eclipsewillautomaticallymopandvacuumyouroorarea.Ifyouprefer
mopping only, use the iHome Clean App to turn off vacuum suction during a Powermop cycle.
Manual Control - Using the navigational D-Pad on the remote control (or in the iHome Clean App) you can manually control where the Eclipse goes to clean.
Spot Clean - TheEclipsewilldeepcleanaspecicspot.First,usethemanualnavigationcontroltoguideyourEclipsetothedesiredlocation.Then,chooseSpot
Clean mode for a deep clean.
10
USING YOUR AUTOVAC

iHome AUTOVAC ECLIPSE iHRV10 Specifications

General

Brand	iHome
Model	AUTOVAC ECLIPSE iHRV10
Category	Vacuum Cleaner
Language	English