iHome AUTOVAC ECLIPSE iHRV10 - SIDE BRUSH AND SENSOR MAINTENANCE

Questions? Contact Customer Service
Web/Email: iHomeclean.com
Phone: 877-370-4580
17
SIDE BRUSH AND SENSOR MAINTENANCE
1: Use a Philips screwdriver to unscrew the side brush screw and remove the side brush.
2: Remove dirt and debris and reinstall using Philips screwdriver.
3:Itisrecommendedtowipedustfromthechargingpinsonyourrobotandchargedockregularly.
NOTE: Itisrecommendedtoreplacethesidebrushevery6-12monthsdependingonuse.
Charging Pins