iHome AUTOVAC ECLIPSE iHRV10 - USING POWERMOP SCRUB

YourAutovaccomesequippedwithaPowermopScrubmoppingattachmentthatconnectstothe2-in-1Dustbin/WaterTank.Followthestepsbelowtoinitiate
wet mopping with your Autovac.
Place the mop pad onto the mop attachment and secure it to the Velcro
strips. Slip corners of the mop pad over the plastic tabs at the rear of
the mop attachment.
1
Slidemopattachmentontodustbinasshowningurebelowuntilyou
hearaclickconrmingthatitislockedinplace.
2
12
USING POWERMOP SCRUB