iHome iDL46 - Alarm Management; Reviewing, Arming, and Disarming Alarms; Snooze and Sure Alarm

Using the
Alarms
Reviewing, Arming and Disarming
Alarm (Turn
Alarm
Function
On
and Off)
Alarms are automatically armed when set. Active alarms are indicated by alarm icons on the display.
1.
Once
an
alarm
is
armed, the lower part
of
the display will show the alarm time.
If
more then one alarm
is
armed, the earliest
alarm time will show.
2.
To
review the alarm time, press
an
alarm button once. The related alarm time and wake source will show
on
the lower part
of
the display.
3.
During alarm review, press and release the
Alarm
Button
once to toggle it
on
or off.
If
the alarm
is
armed, the related
alarm icon will light up.
Resetting the
Alarm
to Come on the Next Day
1.
When the alarm
is
sounding, press and release the
<!)
Button
or
tV
or
tV
Buttons
to stop the alarm and reset it to come
on the next set day. For example, if alarm is set for weekdays and you reset the alarm
on
Friday, the alarm will come on
again on Monday, not Saturday.
Snooze
1.
To
program a custom snooze time, press and hold the
Snooze Button
during normal operation (when alarm
is
not sound-
ing) until the snooze minutes display appears. Press and release the
+or-
Button
to set the snooze time from 1 to 29
minutes.
2.
Press the
Snooze Button
after the alarm sounds. The alarm will
be
silenced and come
on
again 9 minutes later (or at the
custom minute interval
you·
set). Snooze can be pressed several times during the 1 hour alarm cycle.
Sure Alarm
The unit has a sure alarm feature so the buzzer alarm still sound
in
the event
of
a power failure, if the backup battery is
installed (see page 7).
If
your iPad/iPhone/iPod has no sound for 35 seconds
or
is not present, the unit will switch to
buzzer alarm automaticaHy.
5