Iiyama ProLite Series - Controls and Indicators; Display Unit Controls and Indicators

ENGLISH
8 BEFORE YOU OPERATE THE DISPLAY
CONTROLS AND CONNECTORS : DISPLAY
<Back Controller>
<Front>
Power Button
MUTE Mute Button
INPUT
Enter / Input
Select Button
+ + Button
- - Button
Up Button
Down Button
MENU Menu Button
Power Indicator
Green
Lighting : Normal Operation
Flash:PowerManagement(
ECO Mode : Normal )
* If there is no input signal from the computer and passes
for 10 minutes.
Orange
Ifturno󰀨thePowerButtonontheRemoteControlandthe
BackController.PowerManagement(ECOMode:Normal)
Red
Ifturno󰀨thePowerButtonontheRemoteControland
theBackController.PowerManagement(ECOMode:
Lowpowerstandby)
O󰀨 PowerO󰀨
Remote Sensor Remote Sensor
MUTE INPUT
MENU
<Remote sensor and power indicator - location>
1. Pull down the lens to improve remote control performance and ensure good visibility of the power
status diode.
2. Push up the lens before mounting the display for video wall application.
3. Pull/Push the lens until hearing the click sound.
Push right to hide the lens
Push left to extend the lens