English
22
Specifications
• 6.5” ultralight coated paper mid-woofer
• 1.5” high output, low distortion chambered textile dome tweeter
• Audiophile, custom-designed Class-D power amplifiers
• 150 W total RMS power
• Max SPL, peak, pair, music, 1 m: 116 dB
• Complete DSP controlled system, 96 kHz sampling rate
• 45 Hz to 30 kHz frequency response +/- 1 dB
• 37 Hz low frequency extension @-4 dB
• Phase response: Coherent, 0/+20° max from 150 Hz up
• Phase rotation at 100Hz (with high pass filter off): 45° max
• Directivity (Vertical - all voices): +/-50°
• Directivity (Vertical - Wide Dispersion mode): +65°/-50°
• Continuous, long term SPL free field, 1 m distance, one speaker, fullband pink noise: 100 dB(A)
• Peak SPL free field, 1 m distance, one speaker, fullband pink noise: 106 dB(A)
• Peak SPL, half space, 1 m distance, one speaker, fullband pink noise: 108 dB(A)
• Maximum peak SPL, per pair, 1 m distance, music program: 116 dB(A)
• Crossover frequency: 1.9 kHz
• Crossover type: 8th order, linear phase
• LF Power amp (short term): 120 W
• HF Power amp (short term): 30 W
• Power amps distortion at nominal power: 0.005%
• Total latency or TOF: 2.5 ms
• Adjustable additional delay: 0-10 ms
• High pass filter: off, 35, 50, 65, 80 Hz
• LF contour: from -10 to +6 dB
• Desk contour: from -10 to 0 dB
• Mid contour: from -4 to +4 dB
• HF contour: from -6 to +6 dB
• Sentitivity: -4 dBu / 90 dBSPL
• Input gain trim: +/-5 dB
• Unit to unit consistency: +/-0.5 dB
• Operating temperature (non condensing): from 0 to 35 °C
• Coherent time response across the audio spectrum
• High performance vented design
• Built-in ARC room calibration
• X-MONITOR technology
To Next Page
Loading...
