IK Multimedia irig 2 User Manual

English
10
THRU-FX switch
This switch allows you to select the type of output that is sent thru the “Amplifier output jack.”
When this switch is set to THRU, the “Amplifier output jack” carries the same signal that is sent to the
instrument input. This mode is typically used to send the instrument signal, that is plugged into the Instrument
jack, back out to an instrument amplifier or other unbalanced input. This lets you plug your favorite amplifier into
the “Amplifier output jack” and, at the same time, connect iRig 2 to your mobile device that runs, for example, a
tuner app or your favorite recording app. The headphone out lets you easily listen to the output of your device.
When this switch is set to FX, the “Amplifier output jack” carries the signal (processed) that’s coming from your
mobile device and sends it back out to an instrument amplifier. This lets you process your instrument inside your
favorite app and then out back to an - for example - amplifier’s clean channel. The headphone output lets you
conveniently monitor the signal coming from your device.
THRU
FX

IK Multimedia irig 2 Specifications

General

Connector 1	1/8\
Connector 2	1/4” Jack
Headphone out	Yes
6.35 mm (1⁄4-inch) input	1
Impedance	380000 Ω
Product color	Black
Compatible products	iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPhone 3GS, iPod touch (6, 5, 4, 3 gen), iPad Pro (9.7\
Product type	Effects unit

Weight and Dimensions

Depth	21 mm
Width	72 mm
Height	39 mm
Weight	43 g