IK Multimedia iRig Stream Pro - Switching Between Operation Modes; How to Switch to 2-Channel Mode; How to Switch to Multichannel Mode

English
18
To change the operation mode:
1. Push and hold the “Mic/Inst Mute” button for 3 seconds. The button will light up white to indicate that you
currently are in 2-channel mode.
PUSH AND HOLD
>3sec.
2ch mode
WHITE
2. Press the button again and it will light up green to indicate the multichannel mode is selected. Each press of
the button will cycle between 2-channel mode (WHITE light) and multichannel mode (GREEN LIGHT).
PUSH
Multichannel
mode
GREEN