English
25
Connecting instrument
Connect your guitar, bass or any other mono instrument to the instrument input on iRig Stream Pro using an 1⁄4”
plug unbalanced (TS or “mono”) guitar cord.
IMPORTANT: the instrument input on iRig Stream Pro will NOT work if a cable with balanced (TRS or “stereo”)
1⁄4” plug is used.
Connecting RCA, headset and microphone/instrument
It is also possible to connect RCA, headset and a microphone/instrument at the same time. You can adjust the
levels of each inputs with dedicated numbered thumbwheels and the overall level that is recorded is controlled
by the main Level knob.
To Next Page
Loading...
