IKA RV 8 - Warning Symbols Explained; Safety Instructions

21
Page
Declaration of conformity 21
Explication of warning symbols 21
Safety instructions 21
Correct use 25
Unpacking 25
Useful information 26
Setting up 26
Drive RV 8
Glassware
Hose system
Heating bath
Commissioning 31
Assembling the stand pillar RV 8.1 32
Maintenance and Cleaning 33
Accessories 33
Error Codes 36
Technical data 36
Solvent table (excerpt) 37
Warranty 37
Explication of warning symbols
Declaration of conformity
Contents
We declare under our sole responsibility that this product corresponds to the regulations 2014/35/EU, 2006/42/EC, 2014/30/EU and
2011/65/EU and conforms with the standards or standardized documents EN 61010-1, EN 61010-2-051; EN 61326-1 and EN 12100.
Safety instructions
For your protection
The safety lift operates at power failure and
when the device is switched off. It is designed
to raise itself with the glassware attached.
Therefore, please note that the lift without
glass assemblies goes up quickly due to the
reduced weight.
•
Read the operating instructions completely before
starting up and follow the safety instructions.
•
Keep the operating instructions in a place where they can be
accessed by everyone.
• Ensure that only trained staff work with the appliance.
• Follow the safety instructions, guidelines, occupational health
and safety and accident prevention regulations. When working
under a vacuum in particular!
• Wear your personal protective equipment in accordance with
the hazard category of the medium to be processed. There may
be a risk of:
- splashing liquids,
- body parts, hair, clothing and jewellery getting caught,
- injury as a result of glass breakage.
EN
DANGER
CAUTION
WARNING
This symbol identifies information that is of vital importance for protecting your health and
safety. Disregarding this information may lead to health impairment and injuries.
This symbol identifies information that is of vital importance for the technically correct func-
tioning
of the system.
Disregarding this information may result in damage to the instrument or to system components.
This symbol indicates information which is important for proper use and ensuring that the op-
erations of the instrument
are performed eciently.
Failure to observe this information may result in inaccurate results.
Danger - Reference to exposure to a hot surface!
General hazard.
DANGER
Source language: German