Ikco DONG FENG H30 CROSS 2016 User Manual

77
1
MULTI-FUNCTION DISPLAY (DOT MATRIX)
Function description
Clock
• Displaying 24h system time with an
initial display of 00:00 and the second
digits ashing.
• Adjusting method: when the ignition
switch is connected, press down the
key D for more than 0.8s for clock
adjustment (minute/second digits
ash), and press down the H key for
hour adjustment (0 23 for 24h system)
and the M key for minute adjustment
(00- 59); the normal display will be
resumed 10s after the adjustment or
by pressing down the D key.
Calendar
• The calendar is displayed in the
manner of YY/MM/DD, week.
• Calendar adjustment: after the ignition
switch is connected, press down the
D key for more than 0.8s for clock
adjustment; after the adjustment,
keep the state for 5s and switch
to the calendar adjustment mode
automatically.
Set the year at rst (with the year
digits ashing): press down the H key
for increasing years and the M key for
decreasing years.
Keep the state for 5s and automatically
switch to the month setting mode (with
the month digits ashing): press down
the H key for increasing months and M
key for decreasing months.
Keep the state for 5s and automatically
switch to the date setting mode (with the
date digits ashing): press down the H
key for increasing days and M key for
decreasing days.
Keep the state for 5s and automatically
switch to the week setting mode (with
the week digits ashing): press down
the H key for increasing weekdays and
M key for decreasing weekdays.
Automatically quit the clock and calendar
adjustment mode by keeping this state
for 5s later or pressing down the D key
for more than 1s.
Temperature
The outside temperature is displayed on
the right top of the display as long as the
power supply for the ignition switch is
connected, with an accuracy of 1ºC and
measurement error of ±1ºC (excluding
sensors).
– The symbol
ashes at a frequency
of 1Hz at -3ºC ~ +1ºC (including the
limits) and stays on below -3ºC.
– The normal range for temperature
displayed is -40ºC ~ +80ºC. If not, the
temperature will not be displayed.
– The temperature display is out of the
control of any key.
Warning:
• The clock and calendar should
be adjusted when the vehicle is
stopped.
• The travel information can be
switched after ensuring driving
safety.

Ikco DONG FENG H30 CROSS 2016 Specifications

General

Brand	Ikco
Model	DONG FENG H30 CROSS 2016
Category	Automobile
Language	English