IKEA BEJUBLAD - Page 15

ENGLISH 15
to start cooking.
Pizza

1
3
2
4 5
1. Turn the Functions knob
A
to symbol
the display shows “BREAD”. To select the
“PIZZA” function, proceed as follows:
2. Turn the “Browse” knob
B
: “PIZZA”
appears on the display.
3. Press
C
to select the function.
4. Turn the “Browse” knob
B
to set the
required temperature (between 220°C
and 250°C) and conrm with button
C
.
5. Turn the “Browse” knob
B
to set the
required cooking duration and press
C
to start cooking.
Settings
Turn the “Functions” knob
A
indicator to the
symbol to access a submenu containing
ve display settings which can be changed.
Clock
Turn the “Browse” knob
B
to display
CLOCK. To change the time, see the
previous section (SETTING THE CURRENT
TIME).
Eco
With the ECO mode selected (ON), the
display reduces the brightness, showing the
clock when the oven is on standby position
from 3 minutes. Also, the oven light is
switched off during cooking. To view
information on the display and switch the
light on again, just press the button
C
or
turn one of the knobs.
1. Turn the “Browse” knob
B
to display
“ECO.
2. Press
C
to access the setting (ON/OFF).
3. Turn the “Browse” knob
B
to select the
desired setting and conrm by pressing
button
C
.
4. During a cooking function, if the Eco
Mode is activated, the cavity lamp
will be switched off after 1 minute of
cooking and reactivated for each user
interaction.
Acousticsignal
To activate or deactivate the acoustic signal,
proceed as follows:
1. Turn the “Browse” knob
B
to display
“SOUND.
2. Press
C
to access the setting (ON/OFF).
3. Turn the “Browse” knob
B
to select the
desired setting and conrm by pressing
button
C
.
Brightness
To change the display brightness, proceed
as follows:
1. Turn the “Browse” knob
B
to display
“BRIGHTNESS.
2. Press button
C
number 1 appears on
the display.
3. Turn the “Browse” knob
B
to increase
or decrease brightness and conrm by
pressing
C
.