47
FAULT CAUSE TROUBLESHOOTING
Tableware is not dry.
The combined deter-
gent used has a poor
drying performance.
1. Use rinse aid to improve dry-
ing performance.
2. Use a different combined de-
tergent with a better drying
performance.
Extra Dry not activated
to improve drying per-
formance.
● Activate Extra Dry.
Tableware removed
too early or drying pro-
cess not yet ended.
1. Wait until the programme
ends.
2. Only remove tableware
30minutes after the pro-
gramme has ended.
Rinse aid used has a
limited drying perform-
ance.
● Use a name-brand rinse aid.
Eco products may have lim-
ited effectiveness.
Plastic tableware is not
dry.
Not a fault. As plastic
does not store heat so
well, it also does not
dry as well.
● No remedial action possible.
Cutlery is not dry. Cutlery not arranged
properly in the cutlery
basket or cutlery
drawer.
1. Arrange the cutlery properly.
→"Arrange tableware",
Page35
2. Arrange cutlery individually
where possible.
3. Avoid points of contact.
To Next Page
Loading...
Need help?
General
