What to do if my IKEA GRANSLOS displays 'C3'?
If your IKEA oven displays "C3", the cleaning function is not working because the door is not fully closed or the door lock is defective. Make sure that you fully close the door.
What to do if my IKEA GRANSLOS Oven display shows an error code not in the manual?
If your IKEA oven displays an error code not listed in the manual, it indicates an electrical fault. Try deactivating the oven using the house fuse or the safety switch in the fuse box, and then reactivate it. If the error code reappears, contact an Authorised Service Centre.
Why is there steam and condensation in my IKEA Microwave Oven?
Steam and condensation might be settling on the food and inside your IKEA Microwave Oven because you left the dish in the oven for too long. Do not leave dishes in the oven for more than 15-20 minutes after cooking.
Why is there condensation in my IKEA GRANSLOS?
If you notice steam and condensation settling on the food and inside your IKEA Oven, it's probably because you're leaving dishes in the oven for too long after cooking. Avoid leaving dishes in the oven for more than 15-20 minutes after the cooking process has ended.
How to fix an IKEA GRANSLOS that won't heat up?
If your IKEA oven isn't heating up, start by activating the oven and setting the clock. Then, double-check that all your cooking settings are correctly configured. Ensure the oven door is completely closed. If the problem persists, inspect the fuse. If the fuse continues to trip, it's time to call a qualified electrician.
What to do if IKEA GRANSLOS is not heating?
If your IKEA oven isn't heating, first, make sure the oven is activated. If it is, check that the clock is properly set. Also, confirm that you've selected the correct settings for your cooking needs. Finally, ensure the door is fully closed. If these steps don't resolve the issue, check the fuse. If the fuse continues to release, consult a qualified electrician.
How to prevent steam and condensation in my IKEA Microwave Oven?
Steam and condensation in your IKEA Microwave Oven usually occur when food is left inside for too long after cooking. To prevent this, don't leave dishes in the oven for more than 15-20 minutes after the cooking cycle finishes.
What does 'C2' mean on my IKEA GRANSLOS display?
The "C2" displayed on your IKEA oven indicates that you're trying to start the Pyrolysis or Defrost function without removing the core temperature sensor plug from the socket. Remove the core temperature sensor plug from the socket.
How to fix F102 error on IKEA GRANSLOS Oven?
The "F102" error code on your IKEA oven indicates that the door is not fully closed or the door lock is defective. Ensure the door is completely closed. If the error persists, deactivate the oven using the house fuse or the safety switch in the fuse box, then reactivate it. If the display continues to show "F102", contact the service centre.
What to do if my IKEA GRANSLOS does not heat up?
If your IKEA oven isn't heating up, several factors could be at play. First, ensure the oven is activated and the clock is properly set. Also, verify that the necessary settings are correctly configured. A common issue is a tripped fuse, so check that and if it repeatedly releases, contact a qualified electrician. Finally, make sure the oven door is fully closed.
General| Type | Built-in oven |
|---|---|
| Energy efficiency class | A |
| Usable volume | 71 L |
| Width | 59.5 cm |
| Height | 59.5 cm |
| Voltage | 220-240 V |
| Capacity | 71 L |
| Color | Stainless steel |
| Frequency | 50 Hz |
To Next Page
