Display
1 2 3
1
Cooking function
2
Temperature
3
Time
Button Function Description
On / off To activate or deactivate the appliance.
Selection To set an oven function.
Fast Heat Up To activate the Fast Heat Up function.
Pyrolysis To start the pyrolytic cleaning.
Clock To set a clock function.
/
Minus, plus To set the time and temperature.
Setting an oven function
12
1. Activate the appliance.
2.
Press
again and again until the sym-
bol for the necessary oven function
flashes.
The display shows the default tempera-
ture. If you do not change the tempera-
ture in approximately five seconds, the
appliance starts to operate.
3. To change the temperature, press + or
-.
Changing the temperature
To change the temperature when the appli-
ance operates:
1.
Press the button
. The symbol ° flash-
es.
2. Press the button + or - to change the
temperature.
When you set an oven function, the
temperature symbol
flashes. The sym-
bol shows that the temperature in the appli-
ance increases.
When the appliance is at the set tempera-
ture, an acoustic signal sounds and the tem-
perature symbol stops flashing.
Oven functions
Oven Function Application
Light To activate the oven lamp without a cooking function.
Forced Air Cooking
To bake on more than one shelf positions at the same
time. To dry food. Set the temperature 20 - 40 °C
lower than for Conventional Cooking.
Conventional (Top
and Bottom Heat)
To bake and roast food on one shelf position.
ENGLISH 10
To Next Page
Loading...
Need help?
General
