2.
Press the button
. The display shows
FHU. The Fast Heat Up function starts
to operate.
3. When the Fast Heat Up function is com-
pleted, an acoustic signal sounds. FHU
goes out. The set oven function contin-
ues to operate.
4. Put the food in the oven.
Clock functions
Clock function Application
Time of day To set, change or check the time of day.
Minute Minder To set a countdown time. This function has no effect on the
operation of the oven.
Duration To set how long the appliance must operate.
End To set when the appliance must be deactivated.
You can use Duration and End
at the same time to set the time when
the appliance must be activated and then
deactivated. First set Duration
, then End
.
Setting the clock functions
12
1.
For Duration
and End , set an
oven function and temperature. This is
not necessary for the Minute Minder
. Refer to "Setting an oven function".
2.
Press
again and again until the sym-
bol for the necessary clock function
flashes.
3. Press + or - to set the necessary clock
function.
The display shows the symbol for the
clock function you set. When the set
time ends, the symbol flashes and an
acoustic signal sounds for two minutes.
With the Duration
and End func-
tions, the appliance deactivates auto-
matically.
4. Press a button to stop the signal.
5. Deactivate the appliance.
Cancelling the clock functions
1.
Press
again and again until the sym-
bol for the necessary clock function and
flash in the display.
2. Press and hold the button - until the
clock function goes out.
ENGLISH 12
To Next Page
Loading...
