EasyManua.ls Logo

IKEA LIVSLAGA - Maintenance and Troubleshooting; Cleaning and Care Instructions

IKEA LIVSLAGA
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH 9
Disconnectpowerbefore servicing.
- All the enamelled and glass parts
shouldbecleanedwithwarmwaterand
neutral solution.
- Stainless steel surfaces may be stained
bycalcareouswateroraggressive
detergents if left in contact for too long.
Anyfoodspills(water,sauce,coffee,etc.)
shouldbewipedawaybeforetheydry.
- Cleanwithwarmwaterandneutral
detergent,andthendrywithasoft
clothorchamois.Removebaked-ondirt
withspeciccleanersforstainlesssteel
surfaces.
NOTE:cleanstainlesssteelonlywithsoft
cloth or sponge.
- Do not use abrasive or corrosive
products, chlorine-based cleaners or
pan scourers.
- Do not use steam cleaning appliances.
- Donotuseammableproducts.
- Donotleaveacidoralkalinesubstances,
such as vinegar, mustard, salt, sugar or
lemon juice on the hob.
CLEANING THE HOB PARTS
- Grids, burner caps and burners can be
removed to be cleaned.
- Cleanthembyhandwithwarmwater
and non-abrasive detergent, removing
anyfoodresiduesandcheckingthat
none of the burner openings is clogged.
- Rinse and dry
- Retburnersandburnercapscorrectly
in the respective housings.
- Whenreplacingthegrids,makesure
thatthepanstandareaisalignedwith
the burner.
- Modelsequippedwithelectrical
ignition plugs and safety device require
thorough cleaning of the plug end in
order to ensure correct operation.
Checktheseitemsfrequently,andif
necessary,cleanthemwithadamp
cloth.Anybaked-onfoodshouldbe
removedwithatoothpickorneedle.
NOTE: to avoid damaging the electric
ignitiondevice,donotuseitwhenthe
burners are not in their housing.
Maintenance and cleaning

Other manuals for IKEA LIVSLAGA

Related product manuals