Why salt indicator stays on in my IKEA Dishwasher?
The salt indicator in your IKEA Dishwasher might stay on after refilling the salt container if you're using salt that takes longer to dissolve. This doesn't negatively affect the appliance's performance. If the indicator remains on after 3 or 4 cycles, contact the service.
Why does my IKEA RENGORA have unusual foam?
If you notice unusual foam during a wash cycle in your IKEA Dishwasher, make sure you are only using detergent specifically designed for dishwashers.
Why does the salt indicator stay on in my IKEA RENGORA?
The salt indicator in your IKEA Dishwasher might stay on after refilling the salt container if you're using salt that takes longer to dissolve. This does not negatively affect the appliance's performance. If the indicator remains on after 3 or 4 cycles, contact the service.
Why is there rust on the cutlery in my IKEA RENGORA Dishwasher?
If you notice rust on cutlery washed in your IKEA Dishwasher, there may be too much salt in the water. Consult the section on 'The water softener'. Also, avoid placing silver and stainless steel cutlery together in the same wash.
How to prevent stains on IKEA RENGORA glasses?
If you're seeing stains and dry water drops on glasses and dishes from your IKEA Dishwasher, the released quantity of rinse aid may not be sufficient; adjust the rinse aid selector to a higher position. The quality of the detergent could also be the cause.
How to improve drying results in my IKEA RENGORA Dishwasher?
If you're experiencing poor drying results with your IKEA Dishwasher: * Avoid leaving tableware inside the closed appliance for extended periods. * Ensure there is enough rinse aid, increasing the dosage if necessary. * Note that plastic items may require towel drying. * Activate the AutoOpen feature for improved drying. * Use rinse aid, even when using multi-tablets.
How to prevent damage to dishes in my IKEA Dishwasher?
To prevent dull, discoloured, or chipped tableware in your IKEA Dishwasher, ensure that only dishwasher-safe items are washed. Load and unload the baskets carefully, referring to the basket loading leaflet. Place delicate items in the upper basket.
What to do if my IKEA Dishwasher does not drain water?
If your IKEA Dishwasher isn't draining water, check to ensure that the sink spigot is not clogged and that the drain hose has no kinks or bends.
How to fix IKEA RENGORA when the programme does not start?
If the IKEA Dishwasher programme isn't starting, make sure the mains plug is properly connected to the socket. Also, ensure the appliance door is fully closed. Check the fuse in the fuse box and replace it if damaged. If a delay start is set, either cancel it or wait for the countdown to finish.
What to do if IKEA RENGORA Dishwasher programme does not start?
If the IKEA Dishwasher programme doesn't start, possible causes include: the mains plug is not connected, so connect it; the appliance door is open, so close it; the fuse in the fuse box is damaged, so replace it; or the delay start is set, so cancel the delay start or wait for the countdown to end.
Initial setup and usage guidelines for the appliance.
How to set water hardness for optimal water softener performance.
Instructions on how to fill the salt reservoir to prevent limescale.
Guide to filling the rinse aid dispenser for better drying.
Instructions for filling the detergent dispenser correctly.
Overview of the appliance's control panel buttons and indicators.
Explanation of the automatic door opening system for drying.
Guidance on placing delicate items in the upper basket.
How to adjust folding racks for optimal dish placement.
Guidance on placing pots and larger items in the lower basket.
Proper placement of cutlery in the basket for effective cleaning.
How to adjust the height of the upper basket for different loads.
Common issues and solutions for appliance problems.
General| Capacity | 13 Place Settings |
|---|---|
| Number of Programs | 5 |
| Delay Start | Yes |
| Child Lock | Yes |
| Type | Built-in |
To Next Page
