IKEA SKYTTA - Pre-Installation Checks and Preparation

5
Before you start
In the buying process you have decided the number
of doors, door widths and door tracks that will suit
for your width and storage behind. You need to have
this layout with you in the assembly of the system as
you need to know how to place the doors.
Make sure you have the space to cut the rails and as-
semble the doors.
Check the room to see if you need to make any ad-
justments, e.g. oor, ceiling etc.
Take into consideration electric outlets, cables, wires
etc. and make sure they do not interfere with the
SKYTTA system.
Check the packages and make sure they everything
you need is present.
Find main assembly Instructions in the SKYTTA basic
ttings package.
Two people are recommended to work with SKYTTA
system.
If any of above have been missed and you don’t have
a layout or considered stop bar or storage behind,
you need to do this before continuing. Use SKYTTA
planning tool.
SKYTTA has been developed to work perfectly with
other parts of IKEA storage oerings. If an existing
solution is planned to be used outside of the IKEA
range, then please check all measurements carefully
to ensure compatibility.