ENGLISH 15
3. Now unscrew the inlet hose on the back of the washing
machine by hand. Pull out the mesh lter from the valve on
the back of the washing machine with pliers and carefully
clean it.
4. Insert the mesh lter again. Connect the inlet hose to
water tap and washing machine again. Do not use a tool to
connect the inlet hose. Open the water tap and check that all
connections are tight.
CLEANING THE DETERGENT DISPENSER
1. Remove the detergent dispenser by pressing on the release
button and at the same time pulling out the detergent
dispenser.
2. Remove the insert from the softener compartment.
3. Clean all parts under running water, removing all detergent
or softener residues.
4. Wipe the parts dry with a soft cloth.
5. Reinstall the detergent dispenser and push it back into the
detergent compartment.
1
To Next Page
Loading...
Need help?
General
