Ikra BF 25 User Manual

Benzinfreischneider
Petrol brushcutter
Coupe-bordures à essence
Decespugliatore a benzina
Benzinestrimmer
Моторна коса
Бензокоса
73710642-05
BF 25
IT
Prima della messa in funzione leggere le istruzioni per l‘utilizzo!
Istruzioni per l’uso - Traduzione delle istruzioni per l‘uso originali.
GB
Operating Instructions - Translation of the original Operating Instructions
Read operating instructions before use!
FR
Lire attentivement le mode d‘emploi avant chaquemise en service !
Mode d‘emploi - Traduction du mode d’emploi d’origine
DE
Vor Inbetriebnahme Gebrauchsanweisung lesen!
Gebrauchsanweisung - Originalbetriebsanleitung
Ръководство за улотреба - Превод на оригиналното ръководство за употреба
Преди пускане в експлоатация прочетете ръководството за употреба !
BG
Перед применением прочитать инструкцию по эксплуатации!
RU
Инструкция по эксплуатации - Перевод оригинальной Инструкции по эксплуатации
NL
Voor inwerkingstelling de gebruiksaanwijzing lezen!
Gebruiksaanwijzing - Vertaling van de originele gebruiksaanwijzing

Ikra BF 25 Specifications

General

Engine Type	2-stroke
Engine Displacement	25.4 cc
Power Output	0.75 kW
Cutting Width (line)	43 cm
Cutting Width (blade)	25.5 cm
Fuel Tank Capacity	0.5 l
Shaft Type	Straight

Summary

Technical Data

Safety Instructions

Safety Equipment

Details on necessary protective gear and its proper use for safe operation of the device.

Preparatory Measures

Steps to take before operating the device, including checks and safety preparations.

Handling Precautions

Guidelines for safely holding, operating, and positioning the device during use.

Additional Safety Guidelines

Cutting Blade Safety

Specific safety measures and warnings related to the use and handling of the cutting blade.

Before Commissioning

Assembly Steps

Step-by-step instructions for assembling the device and its components.

Setting Cutting Height

Intended Use

Operation

Starting the Motor

Procedures for starting the motor, covering both cold and warm engine conditions.

Switching Off the Motor

Operating Techniques

Cutting Procedures

Cleaning and Maintenance

Device Cleaning

Maintenance Tasks

Replacing Cutting Line Spool

Servicing Components

Storage and Transportation

Storing the Device

Troubleshooting Motor Faults

EC Declaration of Conformity