EasyManuals Logo

ILI DataLink GW1000 User Manual

ILI DataLink GW1000
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
DataLink Technologies Gateways, Inc.
Website: www.datalink-networks.com Tel : (604) 632-4278 / (866) 709-6390
7
The following is the main menu:
Hello Netsilicon
DataLink GW1000-DHP1:DF1 to DH+ Interface Main Menu.
Build : 0803.1.11
1.) Modify IP Parameters
2.) Modify Password
3.) View/Modify Online Parameters
4.) Online Diagnostic Statistics
5.) Save and Reboot
6.) Quit without save
Enter Selection:
To access a menu item, press the corresponding number followed by ENTER.
1) Modify IP Parameters
To edit the IP Parameters, press “1” followed by ENTER. The following submenu is
displayed.
Enter Selection: 1
IP Parameters:
1.) IP Address 192.168.1.111
2.) Subnet Mask 255.255.255.0
3.) Default Gateway 192.168.1.1
4.) Main Menu
To edit the IP address, press “1” ENTER followed by a new address and ENTER.
Likewise, the Subnet Mask and Default Gateway can be set.
Enter Selection: 1
Enter IP address: 192.168.1.33
New IP address [192.168.1.33] accepted
IP Parameters:
1.) IP Address 192.168.1.111
2.) Subnet Mask 255.255.255.0
3.) Default Gateway 192.168.1.1
4.) Main Menu
Enter Selection:

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ILI DataLink GW1000 and is the answer not in the manual?

ILI DataLink GW1000 Specifications

General IconGeneral
BrandILI DataLink
ModelGW1000
CategoryGateway
LanguageEnglish