Ilife X5 - Starting, Pausing, and Sleeping Modes; Scheduling Cleaning Times

Product Operating
2. Starting up/Pause/Sleeping
Sleeping mode: Robot is not working, no display on display panel and power switch is on;
Selected mode: Robot is not working, “88:88” on display panel is flashing;
Cleaning mode: Robot is working, display panel will show different status.
1>. Starting up
A. Make sure the power switch is on;
B. Press CLEAN button on main body or on remote control to start cleaning.
Note: If robot is in sleeping mode, press CLEAN button to wake the robot up from sleeping mode.
Then press CLEAN for a second time, the robot starts cleaning automatically.
2>. Pause
To exchange robot from cleaning mode to selected mode:
A. Press either button on display panel;
B. Press CLEAN on remote control.
Note: When robot is paused, press CLEAN to make robot to re-start cleaning.
3>. Sleeping
To turn robot into sleeping mode from selected mode:
A. Robot will automatically enter sleeping mode if no command received after 15 seconds.
B. Keep pressing CLEAN on main body for 3 seconds.
3. Scheduling
You can schedule to let the robot start cleaning from a certain time. For example, if you set 6:30,robot
will start to clean after 6 hours and 30 minutes from now on, and will clean everyday at this time.
All the scheduling will be automatically cancelled if the power switch turns off.
Scheduling on remote:
1. Power on the robot and point the remote towards the robot.
2. Press PLAN and then use directional buttons to set the schedule.
3. Press CLEAN to save the setting. To cancel, make the number to “00:00”.
Scheduling on display panel:
1. Turn on power switch and press PLAN to enter scheduling mode.
2. In scheduling mode, press PLAN to exchange hour and minute, press HOME to increase number
and press SPOT to decrease number.
3. Press CLEAN to confirm the setting. To cancel, long press PLAN for 5 seconds and then press
CLEAN to confirm cancelling.
* When you set the clock time or schedule, all your operation will be confirmed by tone from robot;
If no tone received, your setting is unsuccessful.
7