Need help?Do you have a question about the iLine microsystems microINR and is the answer not in the manual?
General| Testing Method | Electrochemical detection |
|---|---|
| Sample Type | Capillary whole blood |
| Result Time | Approximately 1 minute |
| Display | LCD |
| Device Type | Portable Coagulation Monitor |
| Intended Use | To monitor oral anticoagulation therapy (OAT) by measuring prothrombin time (PT) expressed as INR |
| Measurement | Prothrombin Time (PT/INR) |
| Measuring Range | INR: 0.8 to 8.0 |
| Connectivity | Bluetooth |
| Power Source | Rechargeable battery |
| Weight | 150 grams |
Details the intended use for OAT monitoring and essential safety warnings before system use.
Explains the microfluidic technology and chemical reaction for INR determination.
Details turning on the meter, inserting the chip, and the core measurement steps.
Step-by-step instructions for collecting and applying capillary blood for the test.
Lists common error codes, their probable causes, and recommended solutions for troubleshooting.
To Next Page
