iLive ITDP310B - Connecting to Your TV

iLive16
Connecting a Television
Requires an RCA video cable (not included)
1. Connect an RCA video cable to the
COMPOSITE VIDEO OUTPUT on the bar
speaker and a composite video input on a
television.
2. Adjust the connected television to the
correct input setting.
3. Video played on or through the bar speaker
will now show on the connected television.
Requires an HDMI cable (not included)
Please note, the HDMI output will not support video
from a docked iPod or iPhone. To output video from
an iPod or iPhone, use the Composite Video Output.
1. Connect an HDMI cable to the HDMI
OUTPUT on the bar speaker and a HDMI
input on a television.
2. Adjust the connected television to the
correct input setting.
3. Audio and video played on or through the
bar speaker will now show on the connected
television.
Composite Video Output
Good - Video
HDMI Output
Best - Audio and Video
Requires an RCA audio cable (not included)
1. Connect an RCA audio cable to the RCA
AUDIO INPUT on the back of the bar speaker
and an audio output on an audio source.
2. Press the SOURCE button to switch to AUX
mode.
3. Use the connected audio source’s native
controls to play and control audio played
through the connected bar speaker.
Using the RCA Audio Input
Good - Audio