iLive ITDP310B - Clock and Alarm; Setting the Clock; Setting the Alarm

Customer Support: 1-888-999-4215 iLive 9
1. Press the POWER button to turn the bar
speaker o.
2. Press the CLOCK button.
The hour will begin to blink.
3. Press the SKIP buttons on the bar speaker or
the up and down DIRECTIONAL buttons on
the remote to adjust the hour.
4. Press the CLOCK button.
The minute will begin to blink.
5. Press the SKIP buttons on the bar speaker or
the up and down DIRECTIONAL buttons on
the remote to adjust the minute.
6. Press the CLOCK button to nish setting the
time.
1. Press the ALARM button.
The hour will begin to blink.
2. Press the SKIP buttons on the bar speaker or
the up and down DIRECTIONAL buttons on
the remote to adjust the hour.
3. Press the ALARM button.
The minute will begin to blink.
4. Press the SKIP buttons on the bar speaker or
the up and down DIRECTIONAL buttons on
the remote to adjust the minute.
5. Press the ALARM button repeatedly to cycle
between OFF, FM RADIO, and iPod.
When the display shows iPod, press the
SELECT button on the remote to wake to the
docked iPhone or iPod.
When the display shows the FM radio, press
the MEMORY +/- buttons on the remote
to select an FM radio preset, then press the
SELECT button on the remote to wake to the
selected FM radio station.
Setting the Clock
Setting the Alarm
Clock and Alarm