9
Mounting Your Speakers
Attaching Your Speakers
1. Locate the mounting bracket holes on the top and bottom of the speaker (one on each side)
2. Insert the anchors through the hole in the mounting bracket into the mounting bracket holes on the
speaker.
3. Screw in and tighten the anchors to secure the speaker into place.
Placing Your Speakers
These speakers feature an IP44 water-resistant protection, UV resistant coating, and a powder-coated, rust-
proof grill for outdoor use. If you choose to mount the speakers outside, place them in a covered setting or
somewhere sheltered from rainfall, splashing, or spills.
Note: Remember to keep the distance between the speakers under 25ft. for the connection cables.
Attaching the Mounting Hardware
This speaker set comes with four screws and four external anchors. Make sure the surface you choose is able
to support the weight of the speaker and mounting bracket. Additional tools (such as wood screws or wall
anchors) may be required.
1. Position the mounting bracket vertically or horizontally on your wall.
2. Attach the mounting bracket to the wall with the screws, as seen below.
To Next Page
Loading...
