Illustra Flex 3MP Indoor and Outdoor Dome Cameras Quick Start Guide
18 8200-1456-02 E0
System Requirements
The below table lists the minimum requirements to implement and operate Illustra Flex 3MP Indoor
and Outdoor Dome cameras.
Table 25 System Requirements
System hardware
CPU Intel Pentium 4 2.4GHz or equivalent
RAM 1 GB or above
Display NVIDIA GeForce 6 Series or ATI Mobility Radeon 9500
System software
Browser Microsoft Internet Explorer 9 or above, Firefox, Safari, Chrome
Unit
Power Supply AC 24V / PoE
Networking
Wired
10/100BASE-T Ethernet (RJ-45 connector)
NOTE: A switch is required for surveillance on multiple units.
NOTE All the installation and operations should comply with your local electricity safety rules.
CAUTION
To avoid damage to the unit, never connect more than one type of power supply (PoE IEEE802.3
Ethernet Class 0 or AC24V power plug) at the same time. If using PoE, this camera is to be
connecting only to PoE networks without routing to heterogeneous devices.
To Next Page
Loading...