Ilsintech SWIFT KF4 - MOTOR DRIVE OPERATION; MOTOR CALIBRATION

3| When arc test is completed, the following screen is displayed.
4| Press to stop arc before test is completed if necessary.
5| Arc Test Results
TEST RESULT DESCRIPTION
Arc good
The current arc amount is adequate
Arc too weak
The current arc power is too weak and needs Arc Calibration
Arc too strong
The current arc power is too strong and needs Arc Calibration
6.5.3 DIAGNOSTIC TEST
The diagnostic test is a function to facilitate dust examination, LED examination, motor test and calibration.
TEST ITEM DESCRIPTION
Dust testing
Conducts dust test without fiber.
LED testing
Conducts LED test without fiber.
Motor testing
Conducts motor test.
Heater testing
Conducts heater test.
37