V10M10_IM_EN_02142008
www.i-Luv.com - 18 -
OPERATIONAL INSTRUCTIONS
Basic DVD Operation-continued
Title Play (DVDs only)
1. During DVD playback, press the TITLE button to display the DVD
title content.
2. Press the NAVIGATION S / Tbuttons to select the preferred title.
3. Press the ENTER button to confirm.
4. Playback will begin at Chapter 1 of the title chosen.
Sequence Play
1. Press the MENU button once during SVCD or VCD playback (PBC
is on) to switch PBC off. The player will enter sequence mode.
2. Press the MENU button twice to switch PBC on.
3. Press the PLAY button when an SVCD or VCD is in Stop mode, to
enter Sequence playback.*
* This function is not available on all discs.
Program Play
The Program Play option allows you to program the order in which you want the
chapters to play (up to 16).
o Program menu (DVD, MP3, JPEG discs)
o Program menu (DVD, MP3, JPEG discs)
Note: If PBC is on, this operation will turn PBC off while chapters or tracks play in programmed
order.
o According to the highlight, use the NUMERIC buttons to enter the
chapters or tracks in the order you want them to play. Press the
PLAY button or use the NAVIGATION W / X buttons to highlight
the “Play” item and press ENTER. The chapters or tracks will now
play in the programmed order.
Note: You can program a maximum of 16 titles, chapters or tracks.
o According to the Direction Indicator on the menu, use the
NAVIGATION W / X / S / T buttons to highlight your desired entry.
o During Program Playback, press the PROGRAM button to display
the programmed order on the screen. This will also stop the
program playback. Press the STOP button or the PLAY button to
resume playback.
Notes: To clear the programmed order, use the NAVIGATION W / X / S / T buttons to
highlight the “Clear” option. Press the ENTER button to confirm. To modify the programmed
order, use the NAVIGATION W /
X / S / T buttons to highlight the item you wish to modify and
enter the number of the new chapter or track using the NUMERIC buttons.
To Next Page
Loading...