15 | iLuv
OPERATIONAL INSTRUCTIONS
Using the Shaker Speaker
Select sound output
1. Slide SPEAKER SELECT switch to select main speaker / main speaker+ shaker speaker
/shaker speaker .
2. While using shaker speaker, slide volume switch to select HIGH / MID / LOW volume
Settings
: Main unit speaker sounds only
: Both main unit and shaker speakers will sound
: Shaker speaker sounds only.
Notes:
· If SPEAKER SELECT switch set to , but the shaker is not connected to main unit, the main unit speaker will
sound.
· The main unit cannot control shaker speaker volume.
Listening to the Radio
FM Operations
Turn on the unit, select the FM radio mode by pressing MODE until the “Radio” icon displays,
the FM frequency will display on the LCD screen.
· If there is no operation for three (3) seconds, the LCD will change to time display.
· If FM radio function is operating, unit will change from time display to FM screen.
· If LCD is time display in FM mode, press SELECT to temporarily display the FM frequency for
three (3) seconds, and returns to time display.
Note: Unwind and extend antenna to its full length. It may be necessary to adjust
the direction of this wire antenna until you nd the position that provides the
best reception for your favorite FM stations.
To Next Page
Loading...
