ILVE OV60 - T3 static model with TFT touch - Cooking process; Setting Cavity and Pre-heating; Pre-heating Phase Monitoring; Pre-heating Ended and Suspension

80
°c
30 40 50 60 70 80 90
8
8
0
0
0
SELETTORE TEMPERATURA SONDA
PROBE TEMPERATURE SELECTOR
COOKING WITH MEAT PROBE
11:48 AM
180
80
°C
°C
61°
9m 15s
12:58
MODALIT
À
RISCALDAMENTO CON SONDA
HEATING MODE WITH PROBE
INSTRUCTIONS FOR USE
T3 static model with TFT touch - Cooking process
SETTED CAVITY
Once the cavity has been set (cooking function, temperature and timer
set) conrm to start preheating. At this point the display will switch to
preheating mode
11:48 AM
280
°C
10m
12:58
PRE-HEATING PHASE
There are four levels that allow you to monitor the preheating process.
The red part will progressively increase until it lls the display
11:48
280
9m 15s
°C
AM
12:58
11: 4 8
280
8m 02s
°F
AM
12:58
OFF
MODALITÀ COTTURA
PRE HEATING ENDED
When the set temperature is reached, the display will turn red to indicate the end
of the preheating phase, and the start of the cooking phase. If a cooking time was
set, the oven will automatically switch off when the time expires.
In case of no cooking time set, it is possible to suspend
and then nish cooking
11: 4 8
280
8m 02s
°F
AM
12:58
OFF
MODALITÀ COTTURA
23
OPERATION / USER