imacon Ixpress - Ixpress;Camera Connection

Ixpress/Camera Connection
There are two ways of connecting the Ixpress camera back to the camera
to obtain exposures triggered from the camera release button:
•
Using the adapter plate with internal contacts or the exposure cable.
•
Using the adapter plate and a "Flash Sync" connection from the
camera back to the shutter or lens.
Dependent on the chosen operating mode the Ixpress camera back needs
to be set up accordingly - see "Device Settings Menu" on page 22 for
references:
•
Use the Camera... entry to select camera model.
•
Use the Exposure... entry to set up exposure mode.*
•
Use the Shutter... entry to select basic interval of speeds.*
* Not available for all camera models.
User's Guide - Imacon Ixpress
English
Assembly and Use
42
Ixpress/Camera Connection